Product Overview
HSULC46Z Heavy Skewed 45 Hanger Concealed Flange - Left
The HSURC and HSULC are 45°-skewed hangers designed to support 2x and 4x members in wood construction. These heavy U-shaped hangers feature concealed header flanges providing cleaner visible lines in exposed conditions. These are identical except that they are skewed 45° to the right (HSURC) and the left (HSULC), respectively.
Key Features
- A2 (acute) flange turned in to accommodate end-of-wall installation
- Encapsulates the top flange of the joist, so no web stiffeners are required for standard installation
- Features obround nail holes on the acute side, allowing nails to be easily installed parallel to the joist
- These hangers cannot be modified but will accommodate a 40°- to 50°-skewed joist
Material
- 14 gauge
Finish
- Galvanized. Some products available in ZMAX® coating or HDG; see Corrosion Information.
Installation
- Use all specified fasteners; see General Notes.
- The joist end may be square cut or bevel cut.
- Fill all round and obround nail holes with specified fasteners to achieve table loads. Where noted, triangle holes in the joist flange may be filled for additional uplift capacity.
