Product Overview
SCHA10.75-KT15 Slide-Clip Connector for Horizontal Anchorage Kit
The SCHA connector is an ideal solution for panelized or stick-frame construction where the CFS framing anchors to the top of a concrete floor slab or the bottom of a steel beam. The connector features a wide support leg to decrease eccentricity on anchors and provide a variety of anchorage options. The included SCVS vertical slider helps to strengthen the connector for the highest tension (F2) and compression (F3) loads in the industry.
Key Features:
Provides a full 1" of both upward and downward movement
Tabulated design values for anchorage help mitigate risk and provide ease of specification
Either face of anchorage leg can be used against the support
Accommodates standoff distances up to 4 3/4"
Can be used with 3 5/8", 4", 6" and 8" studs
Prepunched anchor holes accommodate 1/4"-diameter Titen HD or other 1/4"-diameter concrete screw anchors, and 0.157"-diameter powder-actuated fasteners such as the Simpson Strong-Tie PDPAT-62KP
Prepunched anchor holes also eliminate the need for predrilling and help ensure accurate anchor placement
US Patent 10,273,679
Material:
SCHA — 118 mil (10 ga., 33 ksi); SCVS — 97 mil (12 ga., 33 ksi)
Finish:
Galvanized (G90)
Installation:
Use all specified fasteners and anchors. Note that the smaller-diameter anchor holes are provided for PAF installation, and the larger-diameter anchor holes are for 1/4"-diameter concrete screw anchors.
Ensure that the SCVS vertical slider is centered in the SCHA vertical slots by aligning the tic-marks adjacent to the triangle holes on the slider with the ≠ stamp on the SCHA clip.
Ordering Information:
SCHA10.75-KT15 contains (15) SCHA 10.75 connectors and (15) SCVS/97 sliders
SCHA10.75L-KT15 contains (15) SCHA 10.75L connectors and (15) SCVS/97 sliders
The SCHA connector is an ideal solution for panelized or stick-frame construction where the CFS framing anchors to the top of a concrete floor slab or the bottom of a steel beam. The connector features a wide support leg to decrease eccentricity on anchors and provide a variety of anchorage options. The included SCVS vertical slider helps to strengthen the connector for the highest tension (F2) and compression (F3) loads in the industry.
Key Features:
Provides a full 1" of both upward and downward movement
Tabulated design values for anchorage help mitigate risk and provide ease of specification
Either face of anchorage leg can be used against the support
Accommodates standoff distances up to 4 3/4"
Can be used with 3 5/8", 4", 6" and 8" studs
Prepunched anchor holes accommodate 1/4"-diameter Titen HD or other 1/4"-diameter concrete screw anchors, and 0.157"-diameter powder-actuated fasteners such as the Simpson Strong-Tie PDPAT-62KP
Prepunched anchor holes also eliminate the need for predrilling and help ensure accurate anchor placement
US Patent 10,273,679
Material:
SCHA — 118 mil (10 ga., 33 ksi); SCVS — 97 mil (12 ga., 33 ksi)
Finish:
Galvanized (G90)
Installation:
Use all specified fasteners and anchors. Note that the smaller-diameter anchor holes are provided for PAF installation, and the larger-diameter anchor holes are for 1/4"-diameter concrete screw anchors.
Ensure that the SCVS vertical slider is centered in the SCHA vertical slots by aligning the tic-marks adjacent to the triangle holes on the slider with the ≠ stamp on the SCHA clip.
Ordering Information:
SCHA10.75-KT15 contains (15) SCHA 10.75 connectors and (15) SCVS/97 sliders
SCHA10.75L-KT15 contains (15) SCHA 10.75L connectors and (15) SCVS/97 sliders
