Product Overview
TNTSS625234TTR Titen Concrete & Masonry Screw (Box of 50pcs)
Titen Turbo 316SS 1/4 x 2-3/4 Trim 50pc
Our new Type 316 stainless-steel Titen Turbo concrete and masonry screw anchor is engineered for superior performance in corrosive or extreme environments. With all the benefits of our original Titen Turbo anchor, this new stainless-steel version offers enhanced corrosion resistance, making it ideal for applications exposed to saltwater, chemicals or other harsh conditions. In addition to concrete, this model has also been tested and approved for use in brick and wood applications.
The Titen Turbo screw anchor features an innovative Torque Reduction Channel that displaces drilling dust where it can’t obstruct thread action, significantly reducing binding, stripping, and snapping without compromising strength. The patented reverse thread design enables smooth driving with less torque while providing superior holding power. The Torque Reduction Channel also allows more space for dust to help prevent anchors from bottoming out in smaller-diameter screw holes. This screw anchor features a serrated leading edge to cut into concrete or masonry, and a pointed tip for fast, easy installation in wood-to-concrete and wood-to-wood anchoring applications.
- Type 316 stainless-steel body for long-lasting corrosion resistance in severe environments
- Hardened, alloy-steel tip with serrations to cut through concrete
- Engineered TruShield coating provides additional protection against dissimilar metals
- Superior tension load performance
- Matched-tolerance bit not required; use a standard ANSI drill bit for installation
- Designed for installation with an impact driver or cordless drill; installation using the Titen Turbo installation tool is recommended
- Available with either a hex head or, for a flush profile, a 6-lobe-drive trim head
- 6-lobe bit included in packaging for the trim-head version
- Type 316 stainless steel
- TruShield Coating
- Installation Guide
- Drill a hole in the base material using the appropriate diameter carbide drill bit as specified in the table. Drill the hole to the specified embedment depth plus 1/2" to allow the thread tapping dust to settle. While not required, dust may be cleaned from a drilled hole using compressed air prior to screw installation for best results.
- Position fixture, insert screw and tighten using drill and Titen Turbo screw installation tool fitted with a hex socket or 6-lobe bit socket.
