FREE GROUND SHIPPING on orders over $199.00!

*Exclusions Apply*

CBH2.37X5.5-R10 Concealed Beam Hanger (20 Backplates / 10 Pairs)

Simpson Strong-Tie

Write a Review
Retail Price: $1,111.39
Sale Price: $823.26
Contact us for availability
Adding to cart… The item has been added

Product Overview

CBH2.37X5.5-R10 Concealed Beam Hanger (20 Backplates / 10 Pairs)

Computer modeling and CNC manufacturing enables glulam to be delivered to the jobsite in precise lengths and with preinstalled concealed hangers. The CBH concealed beam hanger is specifically designed for such applications, and is installed with readily available Simpson Strong-Tie® SDS Heavy-Duty Connector screws. The CBH hanger design provides for a +/– 1/32" beam length tolerance at each connector, making it easier to crane into place than other concealed hanger designs that use machined aluminum.

Key Features

1/32" tolerance on each end enables easier installation

Multiple router option to suit jobsite needs

Concealed for architectural aesthetics and fire-rated performance


3 ga.


Electro-galvanized. May be ordered as HDG; contact Simpson Strong-Tie.


Use all specified fasteners; see General Notes

Rout carried and/or carrying member according to application needs. The minimum recommended router width and length is 1/16’’ larger than the tabulated part dimensions. The recommended corner radius is 1/4”. The back plates must seat flush against the surfaces to which they are being fastened.

Install CBH plates on carried and carrying members using all specified SDS fasteners

Mate carried member to carrying member according to installation illustrations

Note that the tolerances for glulam finished dimensions provided within CSA 0122 for Canada, and ANSI 117 for the United States, may not provide adequate squareness and depth consistency required to ensure problem-free field installation. To achieve a problem free installation, glulam producers are advising that both beam and column members should be designed with a 1/4” (6mm) undersize in depth and 1/8” (3 mm) in width (eg: 5 1/8”x12” beam becomes 5”x11 3/4”), so that more aggressive planing can be used to achieve the desired squareness and depth tolerances needed for this hanger. In addition, it is suggested to avoid cambered beams with this hanger, and instead design deeper or wider beams to control deflection.